John Deere SW21 Series Rotary Brooms
- Angling degree range
- Brush diameter is 32 inches for big jobs
- Optional dust suppression system
- Optional gauge wheel kit for setting height
Dust deflector for SW21 Series Loader-Mount Rotary Brooms
A steel and rubber dust deflector kit directs material downward when using the SW21 Series Loader-Mount Rotary Brooms.
Wafer kit for SW21 Series Loader-Mount Rotary Brooms
The 50/50 poly and steel wafer brush replacement kit for the SW2160, SW2172, and SW2184 Loader-Mount Rotary Brooms includes the required quantity of wafers to replace the entire brush.
Optional dust suppression system
SW21 Series dust suppression system
227-L (60-gal.) tank
The optional dust suppression system consists of a 227-L (60-gal.) tank supplying water up the nozzles that are positioned in the front of the broom.
The nozzles are easily controlled by a toggle switch located by the height hitch lever.
NOTE: Requires the poly and steel deflector kit. Compatible with lawn dethatching kit.
Brush diameter is 83 cm (32 in.) for large jobs
Brush is large enough for tough jobs
The 83-cm (32-in.) diameter brush is large enough for the toughest jobs.
NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.
Optional gauge wheel kit for setting surface height of broom
For setting surface height of broom (shown with dethatching kit installed)
Gauge wheels shown in rear park stand mounting tubes
An optional pair of gauge wheels are available for setting the height of the broom for limited surface contact. This ensures easy operation when sweeping surfaces or dethatching lawns.
It includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.
Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.
Dust suppression kit for SW21 Series Loader-Mount Rotary Brooms
The dust suppression kit includes 227-L (60-gal.) water tank, electric pump, nozzles, hoses and fittings, electrical harness with switch, and installation instructions for SW21 Series Loader-Mount Rotary Brooms.
NOTE: Requires the steel/rubber dust deflector kit.
Gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms
Gauge wheels with dethatching and dust suppression kit installed
The gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.
Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.
NOTE: By mounting wheels in front of the brush with the dethatching bracket installed, better control of ground pressure can be achieved.
Angling degree range
Angle to the left or right
The loader-mount hydraulic rotary broom has an angling range from 0 to 23 degrees both left and right. Setting the angle allows for the windrowing of material off of surfaces.
NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.
Lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms
Lawn dethatching kit components
The lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms improves control of ground pressure when dethatching and performing general sweeping by moving the gauge wheels in front of and closer to the brush. The kit includes support components, hardware, and installation instructions. The gauge wheel kit is required and sold separately. It is compatible with the dust suppression kit.
| Angling - Angling range degrees, left, center, right: | 23, 0, 23 degree (angle) |
|---|---|
| Miscellaneous - Hydraulic protection (relief valve): | Standard |
| Gauge wheels - Material: | Solid |
| Gauge wheels - Standard: | Optional |
| Shipping - Configuration: | Wood crate |
| Weight - Machine operating: | 417 kg 920 lb |
| Shipping - Units per crate: | One |
| Weight - Power pack shipping: | 243 kg 535 lb |
| Miscellaneous - Dust deflector: | Optional |
| Dimensions - Machine height: | 87 cm 34.25 in. |
| Weight - Machine shipping: | 561 kg 1237 lb |
| Angling - Shear pin protection: | Standard |
| Miscellaneous - Parking stands standard with unit, quantity: | Four |
| Warranty - Time period (machine): | 1 year |
| Brush - Standard bristle materials: | Diameter 81 cm 32 in. Number of brush wafers 46 Poly |
| Brush - Optional bristle material: | Diameter 81 cm 32 in. Number of brush wafers 46 Combination (poly/wire) |
| Dimensions - Power pack width: | 97 cm 38 in. |
| Operation - Brush speed, rpm: | 200 rpm |
| Miscellaneous - Brackets for de-icer optional system: | Standard |
| Dimensions - Machine width: | 244 cm 96 in. |
| Weight - Power pack operating: | 243 kg 535 lb |
| Tractor compatibility - PTO minimum horsepower: | 26.1 kW 35 hp |
| Operation - Working width at max angle: | 195.58 cm 77 in. |
| Angling - Angling method: | Hydraulic |
| Hydraulics - Flow required at operating pressure: | 61 L/min 16 gpm |
| Operation - Working width: | 213.36 cm 84 in. |
| Gauge wheels - Adjustable height range: | Total: 190.5 mm 7.5 in. Underground level: 63.5 mm 2.5 in. |
| Set-up time - Labor hours (with power pack): | 0.5 hours with power pack: 0-2.5 hours |
| Tractor compatibility - PTO, rpm: | 540 rpm |
| Miscellaneous - Dust suppression system (60-gal. water tank): | Optional |
| Dimensions - Machine length: | 175 cm 69 in. |
| Construction - Side frame construction: | 0.48 cm 0.1875 in. |
| Hydraulics - Operating pressure: | 207 bar 3000 psi |
| Hydraulics - System capacity: | 64 L 17 gal. |
| Dimensions - Power pack height: | 132 cm 52 in. |
| Gauge wheels - Location, front, rear: | Front |
| Gauge wheels - Size, diameter: | 89x254 mm 3.5x10 in. |
| Construction - Hood thickness: | 0.19 cm 0.0747 in. |
| Tractor compatibility - Loader, current John Deere series: | 400 |
| Hydraulics - Power pack reservoir: | 57 L 15 gal. |
- Loader Series: 300 Series Loader
- Working Width: 60 in. (152.4 cm)