John Deere SB12 Series Snowblowers
- Durable cutting edge
- Adjustable skid shoes
- Hydraulic chute deflector
- Field-installed cutting edge kits
Adjustable skid shoes extend life of cutting edge
Extend life of cutting edge
The adjustable skid shoes extend the life of the cutting edge.
Field-installed cutting edge kits for SB12 and SB13 Series 3-Point Snow Blowers
These durable cutting edges are made of CHT400 steel. They scrape the layer of ice under the snow and blow it with the snow through the chute.
Blow snow anywhere with the hydraulic chute rotation
Allows operators to blow snow where they want
The hydraulic chute rotation adds versatility by allowing operators to blow snow exactly where they want.
Control the angle with the hydraulic chute deflector
Operator controls deflector angle
The hydraulic chute deflector allows operators to control the blowing angle.
Cutting edge is durable for lasting performance
Durable cutting edge
Cost savings are realized because of the cutting edge’s long-lasting performance.
| Tractor compatibility - PTO overload protection: | Shearbolt |
|---|---|
| Warranty period - Gear box: | One year |
| Impeller - Blades: | Four |
| Skid shoes - Type: | Steel, adjustable |
| Chute - Diameter: | 26.7 cm 10.5 in. |
| Chute - Rotation degrees: | 210 degree (angle) |
| Chain - Roller: | 60 |
| Impeller - Width: | 26.7 cm 10.5 in. |
| Auger - Overload protection: | Single |
| Chain - Idler adjustment: | Automatic |
| Dimensions - Height: | 76.2 cm 30 in. |
| Dimensions - Working width: | 203.2 cm 80 in. |
| Auger - Speed: | 170 rpm |
| Tractor compatibility - Maximum hp: | 60 hp 80 hp |
| Impeller - Speed: | 540 rpm |
| Chute - Deflector adjustment: | Standard Hydraulic |
| Impeller - Diameter: | 66 cm 26 in. |
| Cutting edge - Type: | Replaceable |
| Set-up time - Labor hours: | One hour |
| Weights - Shipping: | 461.3 kg 1017 lb |
| Weights - Operating: | 406 kg 895 lb |
| Dimensions - Length: | 124.5 cm 49 in. |
| Dimensions - Transport width: | 204.5 cm 80.5 in. |
| Tractor compatibility - PTO: | 540 rpm |
| Hitch - iMatch: | Yes |
| Warranty period - Machine: | One year |
| Auger - Diameter: | 50.8 cm 20 in. |
| Chute - Type: | Three-part |
| Tractor compatibility - Minimum hp: | 22.4 kW 30 hp |
| Hitch - Quick coupler: | Yes |
| Chute - Rotation type: | Hydraulic |
| Hitch - Compatibility: | Cat. 1, 2 |
- Working Width: 74 in. (188.0 m)
- Hitch: Cat. 1 and 2
- PTO HP: 30 - 80 hp (22.4 - 59.7 kW)