John Deere WR54 Series Heavy-Duty High-Capacity Overhead Frame Rakes

Tandem wheels for smooth operation

Perfect when operating on rough terrain

The tandem wheels on WR54 Series High-Capacity Wheel Rakes provide added stability and a smooth, level operation across rough field conditions.

Adjustable raking beams

Adjustable raking beams

Rake beams quickly adjust to set the rake wheels from 0 to 8 degrees to allow for more or less aggressive raking. The 0 degree setting is for dry crops and up to 8 degrees is used for short, wet, or matted-down crops. 

Durable wind boards keep hay from getting caught in the wheels and are standard on the WR54 Series Heavy-Duty, High-Capacity Wheel Rakes.

Master control

The master control creates ease for the operator

The master control system on the WR54 Series High-Capacity Wheel Rake allows the operator to control various rake-wheel functions with the flip of a switch.

Transport locks

Overhead frame lock

Rake beam lock

The overhead frame can be locked with chains to secure it for transport and storage.

The rake beams can be locked for easy transport and storage.

Rake wheel lock

The rake wheels can be locked for safe transport and storage.

Rubber-mounted rake wheel teeth improve raking performance

Rake wheel

Rubber-mounted rake wheel teeth

Rubber-mounted teeth allow the rake beams to be tilted to match crop conditions for better raking performance.

Open-center kit for WR5417 High-Capacity Wheel Rake

Use with tractors that have an open-center hydraulic system.

Maximum raking width

Raking widths reach a maximum of 8.8 m (29 ft)

Rake wheel beams adjust independently

The maximum raking width is 8.8 m (29 ft). The rake wheel beams may be angled independently. This allows the operator to do one sided raking if desired.

Free-floating rake wheels

Dampening spring allows wheels to float

Bi-directional spring option installed

The 152.4-cm (60-in.) rake wheels on the WR54 High-Capacity Wheel Rake float freely, thanks to individual dampening springs which are standard equipment. If more precise adjustment for the dampening and float of rake wheels is required, the optional bi-directional spring can be ordered.

The rake wheels may be lifted independently left or right, or both at the same time.

Windrow adjustment made easy with hydraulic remote

Windrow width reaches up to 182.9 cm (72 in.)

Electric control box handles all rake functions

The windrow width of the WR54 Series can be adjusted hydraulically to a maximum of 182.9 cm (72 in.).

One hydraulic remote, along with the electrical control box, handles all the functions of the rake.