John Deere 120 Drawn Flail Shredder
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
Steel rotor bearings for increased bearing life
Rotor bearings
The rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Rubber deflectors will not dent or rust
Rubber deflectors
Front rubber deflectors keep debris and other materials under the shredder and away from the tractor and operator. Because they are made out of rubber, they will not dent or rust.
Heavy-duty John Deere-designed gearbox
Gearbox
A heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
- Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Drawn tractor hookup
Drawn tractor hookup
The 100 Series Flail Shredder is available with a drawn tractor hookup.
Knives
| Knife mounting system | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
|---|---|
| Number of knives | 160 |
| Tip speed | 171 km/h 106 mph |
| Type | Heat-treated, reversible, side-slicer, hard-faced, tungsten-carbide knives optional |
Mainframe
| Hitch | Drawn |
|---|---|
| Safety deflector | Yes |
| Gauge wheels | 7.60-15 infinitely adjustable row spaces |
| Hood thickness | 6.35 mm 1/4 in. |
Dimensions
| Weight | 2,100 kg 4,630 lb |
|---|---|
| Transport width | 2.4 m 7.8 ft |
| Transport length | 7.3 m 24.1 ft |
Drivetrain
| Belts | Power-band, triple 5VX |
|---|
Rotor
| Rotor bearing | Sealed, self-aligning; piloted housing, auxiliary seals, and grease cavities |
|---|---|
| Rotor diameter | 139.7 mm 5.5 in. |
| Bearing size | 41.15 mm 1.62 in. |
| Rotor speed | 1,500 rpm |
Optional Equipment
| Easy transport | Yes |
|---|---|
| Constant velocity joint driveline | Yes |
Power Requirements
| Tractor PTO hp range | 67-200 kW 90-200 hp |
|---|---|
| Tractor RPM | 1,000 rpm |
Cutting Capacity
| Cutting width | 6.1 m 20 ft |
|---|---|
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
- Cutting Width: 20 ft (6.1 m)
- PTO HP: 120 – 200 hp (90 – 149 kW)
- Number of Knives: 80 pairs