John Deere 115 Drawn Flail Shredder
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
- Square rotor designed for superior strength
Drawn tractor hookup
Drawn tractor hookup
The 100 Series Flail Shredder is available with a drawn tractor hookup.
Steel rotor bearings for increased bearing life
Rotor bearings
The rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Heavy-duty John Deere-designed gearbox
Gearbox
A heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
- Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Rubber deflectors will not dent or rust
Rubber deflectors
Front rubber deflectors keep debris and other materials under the shredder and away from the tractor and operator. Because they are made out of rubber, they will not dent or rust.
Knives
| Knife dimensions | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
|---|---|
| Number of knives | 120 |
| Type | Heat-treated side slice |
| Tip speed | 171 km/h 106 mph |
Drivetrain
| Belts | Power band, triple 5VX |
|---|
Dimensions
| Transport length | 5.82 m 19.08 ft |
|---|---|
| Transport width | 2.39 m 7.83 ft |
| Weight | 1,497 kg 3,300 lb |
Cutting Capacity
| Cutting width | 4.6 m 15 ft |
|---|---|
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
Optional Equipment
| Constant velocity joint driveline | Yes |
|---|
Rotor
| Bearing size | 41.28 mm 1.625 in. |
|---|---|
| Rotor speed | 1,500 rpm |
| Rotor diameter | 139.7 mm 5.5 in. |
| Rotor bearing | Sealed, self-aligning, piloted housing, auxiliary |
Power Requirements
| Tractor RPM | 1,000 rpm |
|---|---|
| Tractor PTO hp range | 67-149 kW 90-200 hp |
Mainframe
| Gauge wheels | 4 infinitely adjustable |
|---|---|
| Safety deflector | Yes |
| Hood thickness | 6.35 mm 0.25 in. |
| Hitch | Drawn |
- Cutting Width: 15 ft. (4.6 m)
- Number of Knives: 60 pairs
- PTO HP: 90 - 200 hp (67 – 149 kW)